|
|
Rubber
Stamps
Alphabet
Animals
Anatomy
Art
Backgrounds
Design
Ethnic
Metaphysical
Nature
Objects
Occasions
People
Travel
Words
Single Images
Shop by
Artist
Search
Mounting Supplies
Clear Envelopes
Accessories
Clothing and Gifts
Featured Items
Clearance
|
How to Store and Care for
Ink Pads
How to
Re-Ink Stamp Pads Don't throw out your dried up old stamp pads, re-ink them! Re-inkers come in small squeeze bottles. To re-ink your pad, spread a
thin layer of ink over the pad, then use something sturdy (like an old credit card) to drag across the pad to
evenly spread the ink.
TIP: Whenever you buy a new ink pad, be sure to
buy the matching re-inker. In case the manufacturer decides to
discontinue that color, you have the re-inker that will last you years.
If you have a dried up ink pad and are unable to get a re-inker for it,
you can purchase an ink refresher from us. Ranger has a product that
rehydrates and conditions Ink Pads and Water-Based markers. Since it
only re-hydrates without adding more colors, you have a limited amount
of times you can use it, but it is better than nothing, and a small $5
investment will cover all of your pigment and dye based ink pads. As
well as water based markers and Kaleidacolor Spectrum pads. It has
revived many of my LePlume Markers!
NOTE: It is not recommended that Perfect Ink
refresher be used with waterproof ink pads, or metallic pads. Also, when
using on rainbow pads, use sparingly as over hydration will cause the
colors to run together and ‘muddy’ the surface
How to store Stamp Pads Always store your ink pads with the lids firmly in place. If your pads
come with a thin plastic cover, store that in place as well for extra
protection from drying out (TIP: These plastic
covers can be attached to the stamp pad lid with a foam dot to ensure it
is not lost).
Foam pads (the spongy ones usually used for pigment inks) should be
stored right side up.
Felt pads (the denser ones used for dye based inks) perform better when
stored upside down allowing the ink to stay on the top of the pad.
When storing rainbow pads be sure to keep them level so the different
ink colors don’t run together and become muddy.
How to Clean Stamp Pads To keep the color of your ink pads bright and looking new, avoid mixing
ink colors. Be sure to clean your stamps immediately after use to
prevent getting other colors of ink on your pad.
In times of artistic frenzy, accidents can happen. If you end up with a
cherry red impression on your sunshine yellow pad, try cleaning the ink
pad. Take a damp paper towel and lightly press it on the ink pad to blot
up the color. Repeat blotting with a dry paper towel. You can also try
repeatedly tamping the pad directly onto a clean piece of paper.
Sometimes this can take care of the problem.
On occasion an ink pad will start separating from its base. (in 14 years
of stamping – I have only had this happen twice). Of course this will
inevitably happen to your favorite pad (why – because you use those the
most!) This tends to happen most commonly to foam pads. All you need to
do is place a couple drops of super glue on the base where the ink pad
has separated from, gently put the ink pad back in place, and allow the
super glue to dry before using the ink pad again.
TIP: We store our ink pads in tool cases purchased
from a local home improvement store for under $10. We label the fronts
of the pads with the name of the color, and also stamp a sample of the
color on a label. We both have our pads organized by type. Because the
tool boxes have handles, we can easily grab them and take them when
needed.
With proper care and maintenance, your ink pads can
give you years of reliable service. I have ink pads that have been
around for the better part of a decade. I have had to re-ink them. But
they work just like new!
*copyright 2007 Alluring Impressions LLC*
You are welcome to link to this guide,
but please be respectful
of the time and effort I have put into it. The information in this guide
is copyrighted,
please do not copy it in part or whole. Thank you.
|